Vehicle information
Features:
JPM PRO STREET ·
FULL SIZE MOTORCYCLE, Steel fenders and gas tank, Dual disk front brakes, Piston front and rear calipers, DOT approved, EPA approved, Street legal (Highway too!!), Inverted front forks, Cruises at highway speeds, Liquid cooled engine (No overheating).
SPECIFICATIONS:-
Manufacturer Johnny Pag Motorcycles
ENGINE:
Engine Type 300cc liquid-cooled parallel twin-cylinder 4 stroke
Bore and Stroke 57.0mm x 53.0mm
Compression Ratio 10.2:1
Valve Train DOHC; two valves per cylinder
Induction Dual 26mm Keihin Vacuum carburetor
Ignition CDI
Engine Lubrication Forced Lubrication
HP 23.8/6500 RPM
Torque 18.5/6500 RPM
Idle Speed 1400-1600 RPM
Spark Plug A6RTC/A7RTC
DRIVE TRAIN
Transmission 5-speed
Gear Ratio 1st 2.846 2nd 1.77 3rd 1.333 4th 1.083 5th 0.913
Final Drive Chain
Clutch Multiplate oil bath
CHASSIS / SUSPENSION / BRAKES
Front Suspension Inverted
Rear Suspension Dual shocks (fully-adjustable)
Front Brake Dual-disc with twin-piston calipers
Rear Brake Single disk with twin piston caliper
Front Tire 80/90-21
Rear Tire 160/90-16
Front Rim 21x2.5” Chromed Alloy
Rear Rim 18”x4.5” Chromed Alloy
DIMENSIONS
Rake 38 degrees
Wheelbase 65 inches
Seat Height 20”-23” inches
Curb Weight 360 lbs
Ground Clearance 6”
Fuel Capacity 3.5 gallons, including 0.75-gallon reserve
Fuel Economy 65 MPG
OTHER:
Emissions
Meets Current EPA standards. California version differs
slightly due to emissions equipment.
Available Colors Black w/Grey race stripes, Red w/white race stripes
Model ID Pro Street
FACTORY WARRANTY INFORMATION
12 Months Coverage of defects in materials and workmanship